Air Source Inverter Heat Pump for Swimming Pool
The DC inverter pool heat pump is designed to heat your swimming pool
efficiently and continuously throughout the year while reducing electricity consumption
by up to 30%-50%.
Inverter air source heat pumps use the same principle as reverse cycle
air conditioners to absorb heat from the air to heat your swimming pool. The
higher the temperature, the better the effect.
What is a inverter pool heat pump and its working principle?
The air source inverter heat pump uses a variable speed
compressor motor. The motor accelerates and decelerates as needed to reach and
maintain the required temperature. The result is to reach the required
temperature faster and maintain the required temperature more effectively.
When the output is fixed, the fixed-speed motors will reach the required
temperature more slowly, and once the temperature is reached, they will
maintain the temperature by turning the motor on and off. By changing the
output, the inverter heat pump can speed up the time required to reach the
initial temperature and then maintain a constant temperature without the need
to constantly stop and start the compressor to control the output.
The COP of our inverter pool heat pump series is as high as 13, which
means that for every kilowatt of energy consumed, up to 13 kilowatts of heat
will be transferred to your swimming pool (depending on the air and water
temperature). The inverter technology avoids the power waste of the
fixed-speed motor, increases the energy efficiency of the inverter
heat pump by 30%, and runs quieter.
Advantages of air source inverter pool heat pump:
1. More energy and money
Using full inverter technology, the COP can reach 13.5.3°C (DB/WB) at
26°C/23. During 95% of the pool season, the heat pump runs at about 50% of its
capacity, which results in an average COP of 9. With high COP, it can help
users reduce energy costs by 45%.
2. Fast heating
With the help of inverter technology, the heat pump can run at high
capacity, heating your swimming pool to the target temperature in a short time.
3. Constant temperature water temperature
Using inverter technology, the heat pump can be
intelligently adjusted in speed, run at low capacity, and maintain the
temperature of the pool.
4. Low noise
Using inverter technology, the heat pump runs at low speed
most of the time. Therefore, the noise of the heat pump is at a low level most
of the time. In silent mode, the heat pump can even achieve surprisingly quiet,
20dB(A) at 10 meters.
5. Multiple control modes
Users can choose between powerful mode, smart mode and silent mode to meet different needs.
