Air to Water Heat Pump Cylinder
Air to Water Heat Pump Cylinder is a heat pump developed for the
production of domestic hot water. It uses the energy available in the ambient
air temperature to provide the most economical form of water heating, which is
both comfortable and energy efficient.
Air to Water Heat Pump Cylinder has huge energy saving potential, up to
75% energy saving compared with traditional electric water heater. Built-in
booster heater can further heat the water to 80°C
Air to Water Heat Pump Cylinder can work all day and all year round. It
can work normally even in the night, cloudy or rainy conditions.
The installation location of Air to Water Heat Pump Cylinder may include
boiler room, garage, fume hood, loft space, utility room/space server room,
office toilet and kitchen.
Air to Water Heat Pump Cylinder is especially suitable for households
where only immersion heaters are used to heat water. It is also suitable for
the production of hot water on dairy farms. The heat pump has a good heat
insulation effect and is safe to use.
Air to Water Heat Pump Cylinder Features:
1. Intelligent control: LCD display and remote control
2. World-renowned compressor, built-in fan for silent
3. Overheating protection, high pressure protection, high temperature
protection, low pressure protection and other protection functions
4. Hot water temperature setting: 30°C -60°C. Potential risk of no
drinking water pollution
5. Power saving: the electricity cost is only 1/3 of the traditional
electric water heater.
6. Metal shell, R134A or R410A refrigerant does not contain CFC and will
not consume ozone
6. Safety: water and electricity isolation, no potential hazards such as
flammability, gas poisoning, explosion, fire, electric shock, etc.
7. Easy to install: it can be easily installed by plumber or
electrician, no need for professional refrigeration engineer
8. R134A or R410A refrigerant does not contain CFC and will not deplete
ozone
9. Safety: Water and electricity are completely isolated, and there is
no potential risk of flammability, gas poisoning, explosion, fire or electric
shock related to other heating systems
Air to Water Heat Pump Cylinder Specifications:
1.14kW, 27kW, 41kW, 49kW and 95kW.
2. The highest water temperature: 80℃
3. Service life: 20 years
4. Noise: <65 dB (A)
5. Anti-vibration level: I
6. Waterproof grade: IPV4
Heat Pump Key Componets:
Smart control: microprocessor-based digital controller with LCD display digital controller
American Compressor: Copeland Scroll has high working efficiency.
Japan Saginomiya four way control valve: No back flow and block.
Axial Fans: high wind and low noise
Eco-friendly Refrigerant: without ozone depletion
Silver welding: avoid refrigerant leakage
Air to Water Heat Pump Cylinder Warranty:
1. Heat Pumps have CE and RoHS certificates.
2. 2 years warranty for heat pump water heater
3. 1% spare parts are repaired free of charge.
Leomon Technology Service:
Leomon Technology provides customized services. We can design and produce Air to Water Heat Pump Cylinder according to customers' special requirements.
Air to Water Heat Pump Cylinder LM-KZJRS-S200 Specifications.
|
Model No. |
LM-KZJRS-S200 |
|
Rated heating capacity |
3000W |
|
10000BTU/H |
|
|
Rated hot water |
70L/h |
|
Rated input power |
865W |
|
Running current |
4.2A |
|
Max power |
1250W |
|
Auxiliary electrical heating |
1000-2000W |
|
COP |
3.5 |
|
Rated temperature outlet |
55℃ |
|
Maxt temperature outlet |
60℃ |
|
Power supply |
220-240/1/50/60V/Ph/Hz |
|
Compressor quantity |
1pcs |
|
Compressor type |
Panasonic Rotary |
|
Fan motor quantity |
1pcs |
|
Fan motor input power |
175W |
|
Fan speed |
1400RPM |
|
Air volume |
700M³/h |
|
Noise |
48dB(A) |
|
Tank volume |
200L |
|
Case material |
304 Stainless steel |
|
Water connections |
G3/4"Inch |
|
Ambient temperature |
36℃ |
|
Hot gas defrost |
Yes |
|
Anodized rod |
Yes |
|
Electric expansion valve (EEV) |
Yes |
|
Relieve/safety valve |
Yes |
|
Additional coil heat exchanger |
Yes |
|
Unit dimension |
Φ555mm |
|
1830mm |
|
|
Packing dimension |
L 625mm |
|
W 625mm |
|
|
H 1880mm |
|
|
Weight |
NW 62kg |
|
GW 72kg |
|
|
Container loading qty ( 20GP/40GP/40HQ) |
24/48/48 Pcs |
|
Measuring conditions |
Dry bulb 20℃ Wet bulb 15℃ |
Air to Water Heat Pump Cylinder Applications:
Air to Water Heat Pump Cylinder Installations:
Air to Water Heat Pump Cylinder Connection Diagram:
