Ground Source Heat Pump for Hot Water
Ground source heat pumps (GSHP) use pipes buried in the garden to extract
heat from the ground. This heat can then be used to heat radiators, underfloor
or heating systems, and hot water in your home.
The ground source heat pump for hot water can provide high temperature
hot water up to 65°C. In addition to heating buildings of all sizes and ages,
they can also provide active or passive cooling.
Using heat pumps for floor heating is a very effective
heating method. Together they can achieve an efficiency of approximately 400%.
The GSHP is very suitable for new homes
or large-scale renovations using horizontal loops (where there is land) or
vertical probes drilled into the ground vertically. By extracting energy from
below the surface, ground-source heat pumps are very reliable, even in the
coldest climates.
Ground Source Heat Pump for Hot Water Features:
1. High-performance fully enclosed scroll compressor, Panasonic
compressor
2. Double function of heating and cooling
3. Modular design, small size, saving installation space.
4. Stable operation all-weather, not affected by the weather.
5. Intelligent controller, fault detection, balanced operation, timing
switch machine and other functions.
6. LED touch screen controller and digital remote control
7. Refrigerant R410A: Does not consume ozone
8. Shell and tube condenser and evaporator, high heat exchange
efficiency
9. Automatic defrosts function.
10. Complete safety devices: high and low voltage switching, overcurrent
protection, overload protection, overheat protection, reverse phase and phase
loss protection, short circuit protection, etc.
Warranty:
1). Passed CE and RoHS certification
2). Service life is about 20 years
3). 2 years warranty, buy with confidence
Ground Source Heat Pump for Hot Water Specifications:
Power capacity: 8kW, 10kW, 12kW, 15kW, 17kW, 20kW, 25kW, 28kW, 30kW, 35kW, 40kW, 45kW, 55kW, 60kW, 90kW, 100kW, 115kW, etc.
Product model |
LM020-DFXRS-S |
Heating capacity |
8.2kw |
Input power |
1.9kw |
Rated current |
2.5A |
COP |
4.32 |
Rated outlet hot water temperature |
55℃ |
Highest outlet hot water temperature |
60℃ |
Production capacity |
176L/H |
Hot water Pipe size |
DN20mm |
Heat source inlet water temperature |
15℃ |
Heat source outlet water temperature |
10℃ |
Heat source circulation water capacity |
2000L/H |
Heat source pipe size |
DN20mm |
IP Grade (Level of protection) |
IPX4 |
Anti-electric shock Rate |
I |
Noise |
≤48dB(A) |
Net weight |
80kg |
Gross weight |
85kg |
Metel plate |
Galvanized steel/Spray/Gray |
Body size(W*D*H) |
650*450*650 |
Packing size(W*D*H) |
750*550*850 |
Loading quantity (20GP/40GP/40HQ) |
60/120/180 |
Compressor |
Panasonic |
Refrigerant |
R410A |
Power supply |
220V/50Hz |
Condenser |
Plate |
Evaporator |
Plate |
Expansion valve |
Danfoss /Emerson |
AC contactor |
(220V-18A) |
Thermorelay |
(12-18A)*1 |
Controller |
DF1SS-TS5(Motorola Chip) |
Low-voltage switch |
0.15/0.32MPa |
High-voltage switch |
3.0/3.6MPa |
Power line connect with unit |
3*2.5mm |
Package |
Polywood packing |