Heat pump water heaters are designed to take up as little space as possible and are ideal for installation where space is limited in tight spaces such as under counters and crawl spaces.
The heat pump features a 10 gallon (nominal) tank and 1 element delivering 1650 watts and is designed to fit in tight spaces. Our anodes help protect the tank from the corrosive effects of water and come with a 6-year limited warranty.
Product Features and Options
1. Glass coating
Superior corrosion resistance compared to industry standard glass-lined liners.
2. The coating mix is formulated in the same laboratory that provides protection for our industry-leading commercial product line.
3. Enhanced flow brass drain valve
Our residential water heaters feature solid brass, tamper-resistant, enhanced flow, ball-type drain valves. Drains quickly and easily during maintenance using standard female hose fittings. Designed for ease of operation, the valve includes an integral screwdriver slot with a 1/4 turn radius (open/close) that not only allows full straight-through water flow, but also closes quickly and reliably.
4. Approved for the manufacture of houses
All residential electric water heaters are HUD mobile home/fabricated home compliant.
How does this work?
Cold water enters the water heater through an internal "dip tube" that pushes cold water to the bottom of the tank and hot water through an outlet connection. This arrangement provides the most hot water for a given tank size. A typical residential water heater has two thermostats. The bottom thermostat controls the lower heating element, while the top thermostat controls the upper heating element. Typically, only one heating element is active at a time. Because the lower element sees the cold water first, the lower heating element does most of the work, while the upper heating element is only used when the entire tank cools. Because water corrodes steel tanks, we glass the inside of the tank and install anode rods to help reduce corrosion. A temperature and pressure relief valve is a safety device designed to open when the internal temperature or pressure of a tank exceeds certain limits. The water heater should be large enough to provide enough hot water even when the temperature is cooler and the household needs the most.
Nominal Capacity: 10
Recovery Efficiency: 98%
Upper Element Wattage: 1650
Max Wattage: 1650
Minimum Voltage Required: 110
Anode: Coregard™ Aluminum Anode
Foam Insulation: 1"
T&P Relief Valve: Yes
Water Connection Location: Side
Water Connection Size: 3/4"
Height: 18 1/4"
Shipping Weight: 45lbs/20kg