Description
Inverter
pool heat pump 17kw equipped with R32 inverter technology. Therefore, it is 10
times quieter and 2 times more economical than traditional swimming pool heat
pumps.
Inverter Technology
Inverter
pool heat pumps are manufactured using inverter technology. It is built with a
variable speed compressor that adjusts its speed according to actual needs. The
low speed operation concept of the inverter HP provides customers with higher
COP (output) and lower noise levels than conventional PACs.
The
Inverter pool heat pump chooses its own operating speed, between 25% and 100%
of its maximum power.
The latest generation R32 air conditioner
R32 is a
new generation refrigerant gas with excellent performance and reduced
environmental impact. The new generation gas in the Inverter heat pump is more
efficient than the new generation gas contained in conventional heat pumps for
the same power output.
The R32
converts the heat of the air into the added heat of the pool water.
From the
first day of the bathing season, the Inverter heat pump runs at full power to
heat the pool water, after which, in order to maintain the temperature, the
Inverter HP runs on average to 50% of its capacity to maintain the desired
temperature for the pool.
10 times
quieter
Average
sound level 46 dB (A) at 1 m
When the
desired pool temperature is reached, the Inverter heat pump operates at
approximately 50% capacity to keep it at that level, the average noise level of
the heat pump is 46 dB (A) to 1 m, compared to the noise level of the Inverter
heat pump 56 to 60 dB (A) compared to traditional on/off heat pumps, giving you
a 10 times quieter bathing environment.
Energy
saving more than 2 times
, the
annual average COP9, and the summer temperature maintains as high as 11.
When the
desired pool temperature is reached, the Inverter heat pump runs at about 50%
of its capacity to keep it there, the average COP (efficiency) of the Inverter
heat pump is 11, while the COP of a conventional on/off heat pump is about 5 ,
the energy saving achieved is considerable.
-
Progressive startup technology:
Soft
Start Soft start technology is designed to draw a slow load curve from shutdown
to rated current within 2 minutes to avoid the risk of grid overload and trip
interruption. . While on/off the heat pump will generate a starting current 5
times higher than the nominal current, which will overload the grid and create
a voltage drop.
- Double
rotor variable frequency continuous variable frequency compressor:
Based on
an innovative "dual mechanism" solution, the two motors work together
to balance torque and reduce vibration. This results in efficiency and quieter
operation.
-
Brushless DC Fan Motor:
Less
noise and lower energy consumption.
-
Automatic balancing of high pressure with electronic expansion valve:
No need
to adjust external bypass for best CAP performance in all conditions
Numerous
accessories available:
- A set
of 2 couplings DN50 for quick hydraulic connection.
- Quick
electrical connection kit without even turning on the heat pump.
- 4
anti-vibration pads.
-
Condensate drain.
High-performance
inverter technology
Full
range 230 V
-
4-season heat pump that instantly reverses the defrost cycle.
Exclusive
inverter technology:
- The
compressor has low energy consumption and variable power.
- Low
energy consumption fans.
- LED
display and low power electronic board.
The
average efficiency (COP) is 9 and the temperature maintenance efficiency is as
high as 11.
The
noise level is 46 dB at 1 meter and up to 38 dB when the temperature is
maintained.
- High
performance refrigerant of the latest generation R32. - Real-time display of
water temperature through a clear and user-friendly control panel. - Soft
start: no current consumption causing voltage drop and tripping.
- Fully
automatic operation with immediate user activation.
- The
housing is made of high quality UV resistant RAL white ABS and screws.
- High
performance heat exchanger in pure titanium and PVC, compatible with salt
electrolysis.
-
Electronic expansion valve for optimum performance in all conditions.
-
Automatic water shortage prevention with integrated water flow controller.
- Set
the water heating temperature to 35°C.
-
Magnetic water flow controller.
- Evaporator treatment "blue fin" for better deicing water flow.
