4kw pool heat pump is a 4kw mini heat pump specially designed for above ground swimming pools.
The 4kw pool heat pump is the cutest portable plug and play heat pump in the world, your kids will love it!
Use a heat pump instead of an electric heater to reduce the cost of heating your swimming pool.
With only 0.8 kilowatts (800 watts) of electricity, it can output 4 kilowatts of pool heat for extremely low operating costs.
Plug and Play - Runs from a standard 13A power socket and comes with cable, RCD and UK plug
Designed for small above ground pools up to 10m3 (pool with solar cover)
The heat pump can output up to 4kw of pool heat, but uses only 0.78kw of electricity!
1. Output up to 4kw of pool heat using only 0.78kw of electricity
2. Brand new design
3. Bluetooth control from smartphone
3. Dimensions – 50 x 52 x 56cm (lxwxh)
4. Built-in water flow switch
5. Suitable for pools with water volume up to 10 cubic meters
6. The desired water temperature can be set between 15c and 43c
7. Simple "plug and play" heat pump
8. Supplied with 4m power cord and UK plug/RCD (adapter)
9. 1.25"/1.5" (32/38mm) water connection for standard above ground flexible pool hose
10. Suitable for all above ground pool types, such as Intex, Bestway, Doughboy, etc.
11. 2 Metal Jubilee Hose Clips Included
12. Operates at +10c and above outside air temperature
13. Requires a minimum water flow rate of 1.5 cubic meters per hour for the pump/filter
14. Environmentally friendly R32 refrigerant gas
15. No bypass required
16. Easy to operate - just lift the beak to access the buttons
17. 3 Button LED Display with Bluetooth
18. Much lower running cost than electric pool heaters, 1kw of electricity outputs about 4kw of pool heat for your pool!
19. Titanium heat exchanger
20. Supplied with user manual, drain, plug, water connection, jubilee clip, power cord, UK adapter
21. 2 years warranty
3. Easy-to-use digital control panel
The heat pump has an easy-to-use LED display.
Simple and easy to understand control panel.
The control panel is not affected by rain and weather.
Just use the up and down arrow keys to set the desired pool temperature and the Thermotec Penguin will automatically turn on and off to maintain the desired temperature
4. Control your pool temperature from your smartphone
This allows you to control the operation of the heat pump using a mobile app
1. Check the current pool water temperature
2. Adjust the set temperature of the pool water
3. Turn the heat pump on and off
5. Provide 3-PIN plug and embedded RCD
6. Built-in water flow switch
The heat pump has a built-in water flow switch.
The water flow switch automatically shuts down the heat pump when there is no (or insufficient) water flow, and restarts the heat pump when sufficient water flow is restored.
This allows the heat pump to be used with the clock on the pool circulation pump.
When the circulation pump is turned off, the heat pump will be turned off, and when the circulation pump is turned on again, the heat pump will be turned on again.
Installation is very simple and straightforward.
The heat pump is connected to your existing pool plumbing
It uses the existing pool circulation pump to pump the pool water.
Heat pump with 2 year warranty
2 year warranty on all components
Warranty when the device is installed in accordance with the manufacturer's instructions.
Heating capacity A27/W27: 4kW
Heating capacity: A15/W25 2.2kW
Power input: 0.95kW
Recommended max pool volume: 11-15m³
Max current: 4.7 amps
COP at A27/W27: 4.41
COP at A15/W25 3.61
Nominal water flow: 0.8m³ per hour
Power supply: 230v/1phase/50hz
Rotary compressor brand: Toshiba
Noise at 10 m dB(A): <33
Noise at 1 m dB(A): <43
Water connection: 50mm to 32mm glued spigot
CO2 equivalent: 0.2025
Nett dimensions 310 x 300 x 35mm
Shipping dimensions: 370 x 350 x 388mm
Net weight/shipping weight: 24/28kg