Premium Inverter 25kw including inverter technology, ABS enclosure and WIFI control
Recommended for 110,000 liter spas and pools
Change pool temperature and timers wherever you are
Economical and quiet operation
Pool heat pumps are highly efficient, converting the electricity used and returning five times or more of the energy as heat
Swimming all year round
Inverter technology heat pumps consume 15-30% less power compared to non-inverter heat pumps
1. ABS cabinet
2. DC full inverter
3. Wifi control available
4. Reduce global warming potential
5. Titanium heat exchanger
6. Automatic heating and cooling
7. Quiet operation
Inverter pool heat pump
Ultra-quiet and highest efficiency standards provide you with an all-season experience
Easy-to-navigate LCD screen controls let you easily adjust settings to your liking.
Economical and quiet operation
Pool heat pumps are highly efficient, converting the electricity used and returning five times or more of the energy as heat.
This machine can return 25KW+ heat output with only 3.98KW of electrical energy input. (The heat output will increase as the outside temperature increases). Another way to look at it is that for every $1 of electricity input, you'll get $5-6 more in heat! This is compared to a resistive heater, such as your spa, which heats one element and returns only 1 kW of heat for every 1 kW of electricity, or only $1 of heat for every $1 you spend.
Running a heat pump is also much cheaper than electric or gas heating, saving up to 75%, solar heating on a roof requires a lot of plumbing, requires a pump to run, can be unsightly, and needs sunlight! You can run your pool heat pump 24/7 quietly and economically in the cold and without the sun! They will work from -15 degrees Celsius to +43 degrees Celsius. This pool heat pump is also quiet at 42 DB(a)
Just turn it on!
*Cost to produce 1 million BTU of heat, comparison percentages and prices will vary.
Plumbing installation can be done yourself or by a local plumber if it is convenient for you. Using 40mm high pressure PVC pipe (grade 12 - 50mm outside) simply connect your pool heat pump inlet and outlet to your pool filtration system outlet and inlet, after your pool pump. The bypass valve according to the chart needs to balance the flow of water through the pool heat pump for optimum performance.
Then have an electrician install a suitable power source on his own circuit with the RCD and turn it on!
Heat Pump Location
The device will work in any desired location as long as the following three items are present:
1. Fresh Air
3. Swimming pool filter
The unit can be installed in almost any outdoor location as long as the specified minimum distance from other objects is maintained. Consult your installer to install an indoor swimming pool. Installation in a windy place will not present any problems at all.
What is included
(1) 25iPS heat pump x1
(2) Barrel Connector x2
(3) 10m Cable - Controller x1
(4) Drain pipe x2
(5) Drain plug x2
(6) Anti-vibration feet x4
(7) Winter Cover x1
Capacity: 25.5kW max.
Absorbed power: 4.72kW
Power supply: 380-415V 3ph 50hz
Power consumption: 7.5*3-10A max.
Water flow required: 7.5-11m3/h
Heat exchanger: Titanium with PVC
Compressor: 1x SANYO®
Hydraulic connections: 50mm (48.3)
Sound pressure: 60dB (A)
Net weight: 124kg
Net dimensions: 1110*520*810mm