Description
Efficient
source of heat and hot water, with outside air blown through a network of pipes
filled with R32 refrigerant. This causes the refrigerant to heat up and change
from liquid to gas. The gas then goes through a compressor, which adds more
heat. The Compressed hot gas enters a heat exchanger, where the refrigerant
transfers its heat to cold air or water, which is then circulated around the
house to provide heating. The refrigerant condenses back to the cold liquid and
the cycle repeats. Zero carbon emissions if used with It can closely match the
running costs of other home heating systems. Low maintenance costs, long
service life and low operating costs. It can be integrated with other heating
transmitters, including underfloor heating and solar photovoltaics.
Features:
1. Wide
capacity range (19.5kW to 105kW)
2.
Cooling and heat pump only
3. Use
R-410A refrigerant
4.
Three-phase power supply
5.
ON/OFF switch & auto restart
6.
Temperature setting (16°C to 30°C)
7.
Operating Modes: - Cooling Only: Cooling/Drying/Fan
8. Heat
pump: automatic/cooling/drying/heating/fan
9. Fan
Speed Selection and Air Swing
10.
Timer (set from 1 to 15 hours)
11.
Sleep mode (only available in "cold" or "hot" mode
operation)
Specifications:
Heating
Capacity: 90kW
Water
Connections: 2 x 2-1/2″ Female
Power
Input: 15230 Watts / 28.93 Amps Max. 3 Phase.
COP @ 20
Degrees: 4.58
Noise 1M
≤60dB(A
Anti-electric
shock Rate: I
Throttling
device: Emerson Thermal Expansion Valve
Net
Weight: 570Kgs
Casing:
Galvanized powder coated steel
Maximum
water outlet temperature: 65ºC
Water
Pipe Size (mm) DN100
Dimensions: 2000*1005*1975mm
