Zero-degree cold climate air source heat pump 2-30 tons
Zero -degree of cold climate air source heat pump is a key solution to meet the growing demand of building decarburization under the cold climate. Through the variable speed operation, these heat pumps can provide energy -saving heating and cooling throughout the season.
1. Heat the heat pump to 0°F outdoor temperature-
-Zero -degree cold climate air source heat pump will run at a lower environmental temperature than traditional heat pumps, and has higher heating capabilities under all operating conditions. This product is a feasible choice without the climatic conditions without traditional heat pumps.
2. Wide capacity range
-Zero-degree cold climate air source heat pump can provide 2-30 tons.
3. High-efficiency electrification heating and efficient cooling
-Zero -degree cold climate air source heat pump has AHRI certified heating COP (performance factor) as high as 3.7 and cooling IEER (comprehensive energy efficiency ratio) as high as 21.5, saving energy costs, whether winter or summer!
4. Precise and comfortable control of burning fossil fuels
-The heating of heat pump with a variable -speed compressor is combined with the auxiliary modulation electric heating device, and it can achieve comfortable heating control even on extreme non -planning days without fossil fuels. The transmission compressor system also provides accurate cooling control.
1. Reliable performance
-Leomon has tested and verified the heat pump heating performance of the solution in the NAIC Laboratory humidity test room with an ambient temperature with a thermal pump as low as 0 ° F. The integrated data collection system in the cavity room can read, process and save more than 93,000 data points per minute. The humidity test room can create environmental test conditions from -20 °F to 130 °F. Zero -degree cold climate air source heat pump cooling and heat pump heating performance has been certified by AHRI.
2. High-quality cabinet
-The thermal resistance R value of the 2 -inch hard polyurethane bubble insulation plate is 13 or higher, which exceeds the R value of the cabinet with a 4 -inch thick glass fiber structure. This standard function allows heat pump heating to provide useful heating for the building, rather than escaping through the roof cabinet.
Fans and Blowers
Variable Speed Fans
-Variable speed fan and transmission outdoor fan provide high -performance heat pump heating and cooling airflow. The transmission control can achieve energy conservation when reducing the airflow.
Controls is optimized in all operation mode.
1. Dual fuel options
-Leomon allows a gas heating device with zero -degree cold climate air source heat pump to provide supplementary heat.
-When the condition meets the set value, up to 100% airflow energy vessel wind door provides free adjustment of energy saving.
3. Energy recycling wheel
-Choosing the energy recovery wheel as a function can significantly improve the COP of the device, and it is more effective to help heat pump heating by pre -processing external air.
Contact us to get cold climate heat pump suitable for your size.