How to Save Electricity with Air Source Heat Pump with Radiator?

To make the air source heat pump with radiator system more energy-saving, you can start from the following aspects:

1. Ambient temperature

The working efficiency of the air source heat pump is closely related to the ambient temperature. The higher the ambient temperature, the less electricity is consumed. Therefore, when used in winter, try to keep the indoor temperature at a higher level, such as setting it at around 22℃, which can reduce the running time of the heat pump.

2. Reasonable configuration of radiators

Configure the radiator according to the heat demand of the room. If the heat demand of the room is large, the number of radiators needs to be increased to ensure sufficient heat supply and avoid frequent start and stop due to insufficient heat dissipation, thereby increasing energy consumption.

3. Temperature control setting

Appropriately lower the temperature of unused rooms, such as lowering the temperature by a few degrees, or turning off the air source heat pump system when leaving the room for a long time. For example, setting the indoor temperature to 20℃ instead of 22℃ can save 30% of energy consumption.

4. Optimize system operation

Use frequency conversion technology and spray enthalpy technology to improve the operating efficiency of the system. The inverter heat pump can adjust the operating frequency according to actual needs, thereby reducing the frequency when approaching the target water temperature and improving energy efficiency.

5. Regular maintenance and inspection

Regularly check the distribution system to ensure the positive pressure of the water system pipeline, and adjust the water temperature setting value according to the load change. Avoid starting the electric heating auxiliary system when the heat load is met.

6. Energy-saving control technology

Adopt advanced heat pump technologies such as optimal control and adaptive control to achieve automatic resetting of heating water temperature, and automatically adjust the indoor temperature setting value according to factors such as season, day and night, and room occupancy status to reduce energy consumption.

Through the above measures, the power consumption of the air source heat pump with radiator system can be effectively reduced to achieve the purpose of energy saving.