Description
Chiller and heater in one
While hot tub users most often refer to heating requirements, Leomon heat pumps can also be used as chillers if needed. That's right...it can heat and cool based on simple controller selections. Perfect for hot climates where you need an escape from the hot summer months! For sauna owners, cold water soaks are a must. Now you can quickly swap your hot tub for a cold one! Cold water therapy has many health benefits and is becoming increasingly popular in North America.
Pools that are too hot can cause chemical imbalance issues and can quickly become overgrown with algae if not monitored properly. Chlorine evaporates as the water temperature increases. The hot temperatures of summer can be difficult for pool owners. Pool and spa heat pumps allow homeowners to lower the temperature to the appropriate level. By cooling your pool, you can mitigate the scorching summer heat, and when the temperature drops, the heat pump will switch back to heating mode.
Heating and cooling
Heat pumps can operate at temperatures as low as -4°F (-20°C). This air-to-water heat source is the most efficient cold weather heat pump on the market. Heating and cooling save over 80% over traditional heating equipment. This unit can generate up to 17.5 kilowatts or 59,710 BTU of cable heat energy. No other pool or spa heat pump on the market performs better than Leomon’s heat pumps in cold weather. This allows you to open the pool early and close it later. It is also ideal for energy saving in spas and hot tubs. Works in temperatures up to 104 F even in 20 F conditions! Leomon's heat pump is an excellent heat pump suitable for most swimming pools.
1. Heat pumps for hot tubs, spas and plunge pools or swim spas
2. Easy to install, no refrigeration mechanic required
3. Includes vibrating pad
4. Drainage pan and compressor low temperature protection
5. Hot air defrost
6. Freeze protection of drain pans in cold weather
7. Three modes (heating, cooling, automatic)
8. Includes heat pump digital controller
9. WiFi remote control option
10. Dual-rotor DC inverter compressor
11. Operating temperature range -4°F (-20°C) to 113°F (45°C)
12. Spiral titanium heat exchanger
13. Ultra-quiet brushless DC fan motor
14. Sound insulation
15. High efficiency fin heat exchanger
How it works
Heat pumps use energy in the air. By using an oversized evaporator, energy is removed and transferred to refrigeration. The compressor compresses the gas, causing its temperature to rise. The hot gases then pass through a titanium pool heat exchanger and are transferred directly to the pool or hot spring water. In cooling mode, the unit reverses direction and cools the pool water by removing heat from the titanium heat exchanger and expelling it to the evaporator.
The unit consumes only 1/3 to 1/5 of the heat it generates. Energy savings of up to 80% compared to traditional electric or gas pool or spa heaters. Built-in hot gas defrost and drain pan/compressor freeze protection for cold weather performance.
1.5" water connection
Maximum current 17.3
220-240 VAC
Output 17.5 kW (59,710 BTU)
Weight 256 lbs (116 kg)
Flow 17.20 GPM (pool pump sold separately)
47"L x 21"W x 38"H
1 year parts warranty - 2 year compressor warranty
Technical specifications:
